This Solar Electric vehicle special controller for the electric bicycle. You can charge your ebike directly from the solar panel . do not need to store the energy to the battery , then use the charge and inverter to charge your electric bicycle.
Nowadayts , there are more and more electric bicycles, when it out of power , couse a lot trouble for our life. It is much convenient that the electric bicycle could directly charge by the solar panel. It is always says, where there is sunlight, where there is power. you do not need to worry about the energy when you only have a solar panel. and this controller. it is also much convenient, you do not need to wait still until the battery charge process is completed. when you riding , the controller could charge the battery from the solar panel too. amazing , isn’t ?
A small water generator for home use, you can check this hydro generator, just connect to the water pipe and the charge controller, it will charge the battery, storage the power for home application use, is it magic?
It looks like this. and if you would like to know how to use this hydro generator. there is a video for you to check it.
When you use a solar panel, and want to transfer the solar energy store to the battery or use it to charge your mobile, or lunch a lamp.
Then you may need a solar charge controller to transfer the energy , and protect the battery will not over charge to damage.
First, you many need to check the battery voltage, norV mally, the battery voltage is 12V/24V. this is the safe voltage for human. but now. the 36V 48V and 60V, even 72V battery , they with more efficient usage. and also , the battery voltage should math with the solar panel voltage.
12V Float
14.2V (defaul, adjustable) 12.0—15.0
12V Discharge Stop
10.7V (defaul, adjustable) 9.0—11.5V
12V Discharge Reconnect
12.5V (defaul, adjustable) 11.0—13.0V
24V Float
28.4V (defaul, adjustable) 24.0—29.0V
24V Discharge Stop
19.0V (defaul, adjustable) 18.0—22.0V
24V Discharge Reconnect
22.0V (defaul, adjustable) 22.0—26.0V
36V Float
42.0V (defaul, adjustable) 36.0—45.0V
36V Discharge Stop
30.0V (defaul, adjustable) 27.0—33.0V
36V Discharge Reconnect
38.0V (defaul, adjustable) 36.0—42.0V
48V Float
56.0V (defaul, adjustable) 48.0—60.0V
48V Discharge Stop
40.0V (defaul, adjustable) 36.0—44.0V
48V Discharge Reconnect
50.0V (defaul, adjustable) 48.0—56.0V
60V Float
71.0V (defaul, adjustable) 60.0—75.0V
60V Discharge Stop
50.0V (defaul, adjustable) 45.0—55.0V
60V Discharge Reconnect
63.0V (defaul, adjustable) 60.0—70.0V
Self-Consume
<10mA
USB Output
5V/2A Max
Operating Temperature
-35-+60℃
Siez/Weight
170*92*45/450g
Solar Panel
When the solar panel made, it will marked some parameters as follow:
Electrical Date
Mechanical Data
Maximun Power at STC
90W
Solar Cell Type
Monoctrystalline(125x125mm)
Optimum Operating Voltage (Vmp)
16.0V
Number of Cells
32(4×8)
Optimum Operating Current (Imp)
5.6A
Dimensions
1050x535x2.8mm
Open Circuit Current (Voc)
19.2V
Weight
1.88kg
Short Circuit Current (Isc)
6.16A
Application Class
Class A
Module Efficiency
18.3%
Frame
None
Maximum System Voltage
700VDC (IEC)
Connectors
MC4 Connectors
Maximum Series Fuse Rating
10A
Fire Rating
Class C
Thermal Characteristics
MC4 Connectors
Operating Module Temperature
-40℃to+85℃
Rated Current
30A
Norminal Operating Cell Temperature (NOCT)
45±2℃
Maximum Voltage
700VDC
Temperature Coefficient of Pmax
-0.42%/℃
Maximum AWG Size Range
10AWG
Temperature Coefficient of Voc
-0.31%/℃
Temperature Range
-40°F to194°F
Temperature Coefficient of Isc
0.05%/℃
IP Rating
IP67
Junction Box
IP Grade.
IP 67
Number of Diodes
1 Diodes.
Output Cables.
10 AWG (2.95ft long)
This is the description of the 90W flexible solar panel.
And when you choose the solar panel, and the battery, you may need to pay attention to the description. to make sure their math with each other.
Normally, the most controller could compatible 12V and 24V battery, this MPPT solar charge controller could compatible 12V / 24V /36V /48V battery recognition automatically. also the battery type is from Gel to Flood and the Lead-Acid battery.
It provides the MPPT (Maximum Power Point Tracking) function, the efficiency could reach 98.1%. the max PV Input Voltage 180V, Max Input PV Power , 12V system- 720W, 24V system-1440W, 36V system- 2100W, 48V system – 2800W.
If the solar panel is 550W, so you can connect 5 solar panels together use one controller for the 48V battery system. very helpful for your home use.
This is the inside instruction, you can check the Inductance ( cooper coil) and the Capacitor, also with the imported control chip, more stable and reliable.
For more information, you may check this table , get more reference information for your home solar system.
≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV utilization
≥99%
MPPT working Voltage
12V system (DC20V~DC80V)
MPPT working Voltage
24V system (DC37V~DC105V)
MPPT working Voltage
36V system (DC50V~DC160V)
MPPT working Voltage
48V system (DC72V~DC160V)
Maximum PV input voltage (Voc)
DC180V
The maximum PV input power
12V system (720W)
The maximum PV input power
24V system (1440W)
The maximum PV input power
36V system (2100W)
The maximum PV input power
48V system (2800W)
MPPT 48V 60A Solar Controller
MPPT solar charge controller could compatible 12V / 24V /36V /48V battery recognition automatically. also the battery type is from Gel to Flood and the Lead-Acid battery.
Solar Charge controllers, with different model. the normal is PWM solar charge controller and MPPT solar charge controller.
MPPT solar charge controller: MPPT Maximum power point tracking Function , and short for MPPT. it compares with the PWM.
This solar charge controller could math the Lithium battery, Gel battery, and Flood Battery, Lead-Acid, lithium , also the LiFePO4 battery.
The battery voltage could start from 12V /24V /36V /48V /60V, also, you can connect 4 gel batteries of 12 volts which are set to 14.5 / 15 volts I have to set to 71 volts.
And the charge current from 30A 40A 50A 60A and 100A.
The solar panel 18V Solar Panel for 12V battery, 36V solar Panle for 24V <40V, 54V Solar Panel for 36V battery and 72V Solar Panle for 48V <80V,60V battery is charged with 90V solar panel, voltage is less than 100V.
12V/24V 30A MPPT Solar Charge Controller
This solar charge controller could math the Lithium battery, Gel battery, and Flood Battery, Lead-Acid, lithium , also the LiFePO4 battery.
Tengyu Tech committed to solar and wind renewable energy, to improve the effectively use the renewable energy. improve the environment. make a better future for our planet.
Why we would like to do this?
Now everyone knows the air population, everyone knows the environment protection. so we need more clean energy to instead the fossil fuel.
the electric vehicles are more and more popular.
To remove the carbon population , we can make the more and more clean energy by Solar and Wind.
We would like to share more information about:
Solar panels.
Solar chareg controllers.
Solar PV connectors
Wind generators
Wind solar hybrid system controllers.
I know this is not easy, but I would like to try to make it as one of the human beings to do for our planet, we all hope to have a better future.
If you have any better idea, or better solution, you can comment or contact us, we can discuss together. Thank you so much for your kindly time to read our website.